10 watt UV Countertop Carbon Filter,

Complete - $159.

Carbon Filter-UV Models:

Ultra-Premium Under Sink

Carbon Filter Systems with

UV Disinfection.

Many models to choose from.

Sterilight™

Premium

UV Disinfection

(2-40 GPM Flow)

and

Spare UV Bulbs

Steripen Portable UV

for Travelers / Water Emergencies

Can use Rechargeable Batteries and Solar Charger!

Super high UV dose!

Hydro-Safe™

High Capacity

Commercial / Industrial

UV Disinfection Systems

(40-800 GPM Flow)

Economy

UV Disinfection

all stainless steel

(2 GPM Flow only)

and

Spare

UV Bulbs

UV for TOC Reduction

/ removal of organic compounds.

Item # UVCC
Includes Housing, UV water disinfecting bulb and filter.

Only $135.00

Highly Recommended for:

• city tap water
• kitchens
• bathrooms
• apartments
• hotel rooms
• break rooms
• travelers
• vacationers
• RVs
• nutritional drinks
• and as a gift that says “I care about you”.

Money Saving Opportunities:

• It is much more economical in shipping costs to order the yearly Replacement UV Lamp and carbon block filter now instead of later. 
• If you order any optional accessories now, they will be added to the box and ship for pennies instead of dollars.

UV Counter Top Water Filter

Finally a high quality (made in USA) Countertop UV Water Filter at the BEST prices. This countertop UV water filter adds the power of UV Disinfection of Water to the technology of carbon block filtration.

Comes Complete with a ½ micron carbon block water filter to drastically improve water quality and improve water clarity before bombarding cysts, bacteria, and virus with disinfecting Ultra Violet rays.  Not intended for drinking water that is of unknown quality or is biologically unsafe.

Key Benefits:

• The easiest and most economical UV water filter we sell.
• Instantly attaches to a sink's water faucet in seconds.
• Clear housing provides visual verification that the UV Lamp is working.
• UV Lamp provides a moderate 10 watts of UV disinfection power 24 hours a day.
• UV Lamp is rated for 9000 hours (375 days).  Replace once a year for only $24.
• UV Lamp ultra violet wavelength is 234 nanometers.  Effective for disinfection.
• Disinfection occurs at a standard flow rate of ½ gallons per minute or slower.
• Special ½ micron (Nominal) carbon block water filter cartridge comes INCLUDED.
• Carbon block capacity: Reduces Chlorine, Taste, and Odors for 10,000 gallons.
• Greatly improve water quality and remove chlorine and chemical contaminants.
• Replacement ½ micron UV carbon block cartridges cost only $19 and typically purify water for one year or 10,000 gallons.
• For even greater performance you may replace the lamp and carbon filter every 9-10 months, if desired.
• Portable UV water purification for travelers and vacationers.
• Pays for itself quickly.  Replaces bottled water which costs $10-$20 a week .
• Premium quality engineering and materials.
• Money Back Guarantee!
• For higher levels of UV sterilization (17 watts) see our economical JaneroPure UV Systems.
• Not recommended for high sediment, high turbidity, or infectious waters.  See our JaneroPure (17 watt) UV Systems.
• This system is 100% complete and ready to ship.

 The Premium Quality is Evident:

• Premium quality engineering and materials.
• Compression fittings on all tubing are proof of superior engineering. 
• Water spout is food grade stainless steel with a double o-ring seal. 
• Unbreakable elbow fittings (at the base) are lead-free brass, not plastic. 
•  Diverter valve is made of lead-free brass and engineered to last.
• Made in the U.S.A.
• Quality is guaranteed. 

Sterilite UV Disinfection Systems -High Power

(2-11 GPM)  Residential - Commercial

High Power UV Disinfection!

These UV Disinfection systems use high power UV Disinfection to kill 99.99% of bacteria, virus, and chlorine-resistant Cysts.

• Each model is rated to deliver the highest recommended UV Dose (that of the U.S. EPA and NSF) – which is 40 mili-Joules (mJ) of Ultraviolet energy per cm2.
• Sterilight feels that 30mJ is sufficient, and the US Dept. of Public Health feels that 16 mJ is sufficient (totally outdated).
• These systems are rated to sterilize 99.99% of all virus and microorganisms at a dose of 40 mJ / cm2 at the stated flow rates.

• Various models are available at higher flowrates. 
• UV dose is the same for each model (40 mJ), only the "maximum flowrate" (in GPM) increases.

Civil Defense / Emergency Preparedness

• For Civil Defense / Emergency Preparedness Applications the 2 GPM model (S2Q-PA) and 5 GPM model (S5Q-PA) are available for special order in a 12 volt DC version for point of use disinfection of drinking water.  This would be powered by any large 12 volt battery such as a deep cycle battery, car battery, solar power system, etc.   The 2 GPM model (S2Q-PA) only consumes 19 watts, and the 5 GPM model (S5Q-PA) only consumes 26 watts,  and both models deliver the highest recommended UV dose which is 40 milli-Joules per second @ stated flow rates.  TIP: When the water flows slower than the stated flow rate you are actually delivering an even higher UV dose.  In times of serious biological threat, consider using a flowrate of 1/2 the stated flow rate.  (Why not?)  If you are also using carbon filtration to treat the water, activated carbon works best at a maximum flow rate of 1/2 GPM anyways.

Using and Placing the UV system:

• It's best to place this system AFTER a water purification system, as close the the dispensing faucet as possible, such as 24" away.
• A different use would be to place this system immediately before an RO system or cartridge filter system if bioslime (bacteria slime) formation or virus growth within the filter system is a problem or concern.  This can all clog cartridges and membranes.
• You can place this unit after an atmospheric storage tank to protect against any biological contamination that may occur inside the storage tank.
• Pretreat the water with a 1 micron Pleated Sediment Filter - or - a 1 micron Pleated Sediment Filter followed by a NanoCeram nanofilter if you have a turbidity problem.  Turbidity (cloudiness) and sediments must be reduced to near-zero levels for UV Disinfection to work properly.
• UV Systems and UV Bulbs are designed to be operated 24 hours a day for 365 days a year, and are not to be turned on and off at will.  On/off operation will allow microorganisms to pass through the unit and greatly also shorten the lifespan of the bulb.

UV Disinfection Performance:

• The Sterilight Ultraviolet Disinfection Systems all have a TYPE 304 stainless steel reactor chamber and are premium quality.  Maximum Operating Pressure is 125 PSI.

•  Extra High Power Ultraviolet Rays kill > 99.99% of virus, bacteria, cysts, and pathogens when water flow does not exceed the stated maximum flow rate.

• UV Lamps are designed to last for 365 days of continuous operation, and are easily replaced.
• Premium electronic controller provides a visual countdown of UV Lamp Life Remaining (in days)- and an audible beeping Lamp Failure Alarm!
• System requires an available grounded GFCI electrical outlet. 

• Water quality is important for optimum performance of all UV Systems.  The following levels are recommended:  Turbidity: <1 NTU, UV Transmittance minimum 95%, Hardness: < 7 GPG , Iron: <0.3 ppm. Sulfur-none.  UV disinfection requires clear water.
• Turbidity (suspended microscopic particles) is drastically reduced by using one of our NanoCeram filters or 1 micron pleated sediment filters. 
• To reduce your Turbidity down to basically zero for 14,000 gallons, increase virus and bacteria removal efficiency, and protect your carbon blocks from clogging due to extremely fine sediments, consider using our SuperNano® Particle Filter as your sediment filter.
• Replace UV Bulb every 365 days. 
• Clean or replace the Quartz Sleeve when dirty.
• For an S5Q or larger - due to the UV intensity, the manufacturer recommends that you do not let the UV rays directly contact any plastic fittings you may wish to attach to the In/Out ports.  They recommend first a metal elbow fitting.

See Terms of Purchase at bottom of this page.

Need Help?  Have Questions? 
Call us at 210-568-3628

Money Saving Opportunity:

• You can save a lot of money on shipping if you order more than one UV Replacement Bulb at a time.

The Premium Quality is Evident:

• Premium quality engineering and materials.
• Made in the U.S.A.
• Sterilite has a Warranty of 5 years for hardware and electrical systems, 7 years for the reactor chamber, and 1 year for the UV Lamp.

Key Uses:

• Providing worry-free disinfected purified water
• Protection against water-borne disease outbreaks in city water systems
• Disinfection of well water
• Drinking water in Mexico or third world countries
• Disinfection of drinking water stored in storage tanks.
• Hospitals, Pharmaceutical, Food Service, Laboratories, Electronics, and Aquaculture

See Terms of Purchase at bottom of this page.

Hydro-Safe UV Disinfection Systems - (40-800 GPM)  High Capacity

Hydro-Safe industrial grade High Capacity UV Disinfection systems.

      Standard Features:

• UV Intensity Monitor detects 254 nm Wavelengths and displays results on panel meter
• Audible and Visual Indicators to assure optimum performance
• Elapsed Time Meter measures running time for peak lamp output
• Separate NEMA 4 modified Control Panel for protection from the elements
• Flange Connections (150 Lb. raised face)
• Viewing Port for operational monitoring
• Dry Contact Output for solenoid valve, horn, or other electrical components.
• No need to disconnect water flow to change UV lamps.
• Removable Reactor Chamber Flanges for easy access and cleaning.
• Polished Type 316 Stainless Steel Reactor Chamber
• High Chamber Temperature Alarm provides audible and visual alarm if unit overheats
• Electronic Ballast with internal damage limiting circuitry
• 99.99% destruction of bacteria and virus at rated flow rates.
• Each Hydro-safe UV system delivers a UV dose of 30 milli-Joules/cm2 at the stated max. flow rate.
• See Terms of Purchase at bottom of this page.

See Terms of Purchase at bottom of this page.

See Terms of Purchase at bottom of this page.

^Top

16 Watt UV System Complete- Stainless Steel, 2 GPM, for 1/4" tubing Only $179. 16 Watt Replacement Lamp Replace every 365 Days. Only $45. Product # UVSS2GPMBULB Replacement Quartz Sleeve Replace when discolored or stained. Only $30. Product # UVSS2GPMQS

Economy UV Disinfection - 2 GPM Stainless Steel (2 GPM) UV Disinfection Unit - Stainless Steel This Economical 2 GPM UV Disinfection system kills 99.99% of bacteria, virus, and chlorine-resistant Cysts. All stainless steel chamber. UV Lamp is 16 watts, 110 volts. This system is rated to disinfect 99.99% of all virus and microorganisms at a UV dose of 30mJ / cm2 at 2 GPM flow rate. System comes complete, and with quick connect fittings that accept 1/4" O.D. John Guest tubing.  If you need fittings for 3/8" tubing, please call us at 210-568-3628.  Stainless Steel ports are 1/8" Female NPT. Replace 16 watt UV Bulb every 365 days. Replace or clean Quartz Sleeve when discolored or stained. All UV System require the water to be pre-filtered so turbidity (cloudiness) is less than 1 NTU (very clear- no cloudiness or particulates). A 5 micron sediment pre-filter is usually sufficient but if your water has particulates and turbidity in the 1-5 micron range that are passing through, then you should switch to a 1 micron sediment filter, which is better. You must be sure that the water flow does not exceed a flow rate of 2 GPM for this unit.  Slower flow rates will actually increase the UV dose by allowing more UV contact time.  A small John Guest ball valve will accomplish this nicely if your system does not have one.  Our Carbon Block UV Systems already have this feature built in for you. See Terms of Purchase at bottom of this page.

^Top

UV Systems for TOC Reduction / Removal of Organic Compounds

UV Systems for TOC Reduction and Removal of Hydrocarbons and Halogenated Solvent Contamination.

• These systems use a shorter UV wavelength of 185 nm, and emit much more energy than a standard 254 nm lamp used for disinfection. 
• This higher energy produces Hydroxyl free radicals (OH-) which in turn oxidizes most organic compounds (containing only C-H-O) into carbon dioxide (CO2) and water (H2O).
• Halogentaed solvents and compounds will also break down, but will also release halogens, which still need to be removed.
• These TOC Reduction UV Systems all produce UV dosages in excess of 120 milli-Joules/cm2 even until the end of the lamp life using the special wavelength of 185 nm.
• A suitably designed TOC Reduction UV System can lead to 1-2 ppb reductions of residual TOC in the water supply.
• Both TOC Reduction and Microbial Destruction will occur with these 185 nm lamps.
• In applications where higher or lower UV doses are required to achieve varying levels of TOC Reduction, adjusting the flow rate of the unit can easily achieve the desired results.
• Consult with your professional consultant to be sure the system you are choosing is effective against your particular contamination issue.  The manufacturer is willing to consult with qualified engineers and consultants who are trained in this type of work.
• We always recommend placing a large carbon filter downstream of this process, especially for halogenated compounds (compounds containing bromine, fluorine, chlorine, & iodine.) UV does not remove metals.
• This is professional equipment for professional use by qualified treatment consultants and engineers only.  Use at your own risk.  Do not use without the guidance of a qualified professional who is experienced with this technology.  Proper use also entails laboratory testing of the water for the specific contaminants of concern, before and after treatment.

• Call us at 210-568-3628 to order the system prescribed by your engineer.
• STOC-4S is a 12 GPM system (195 watts) with 1" flange connections (120mJ/cm2).
• STOC-6S is a 19 GPM system (285 watts) with 1" flange connections (120mJ/cm2).
• STOC-8S is a 30 GPM system (375 watts) with 1" flange connections (120mJ/cm2).
• STOC-8L is a 66 GPM system (685 watts) with 2 " flange connections (120mJ/cm2).
• STOC-16L/2 is a 125 GPM system (1370 watts) with 2.5 " flange connections (120mJ/cm2).
• STOC-24L/2 is a 180 GPM system (2055 watts) with 2.5 " flange connections (120mJ/cm2).
• STOC-32L/2 is a 240 GPM system (2740 watts) with 2.5 " flange connections (120mJ/cm2).
• All units have an electropolished and passivated Type 316L stainless steel reactor chamber.
• See Terms of Purchase at bottom of this page.