5 Stage RO Water Systems - Silver Series

Our 6 Stage Silver Series RO System is recommended for:

people who want a top quality, high purity RO system
creating pleasant, crystal clear purified drinking water
improving the taste of nasty, problematic water
eliminating water softener salts, fluoride, nitrates, and metals
reducing pesticides, herbicides, nitrates, and other pollutants
eliminating disease-causing microorganisms (including viruses)
creating healthier drinks and herbal teas with less pollutants (when present)
reducing arsenic levels (when present)

If you want an upgraded version of this product with extra features, check out our Gold Series 5 Stage RO Water systems.

Stage 1: High efficiency 1 micron Sediment Filter to remove rust, sediments, and very fine particulates. (Replace typically every 6 months depending on your water conditions. This filter is inexpensive to replace.) Most RO systems only filter down to 5 microns and let everything from 1-5 microns pass through to the cartridges and membrane.

Stage 2: Matrikx +5 (2 - 5 micron) high efficiency activated carbon block water filter for reduction of chlorine, taste, odors, chemicals, and VOC's. Features premium coconut shell activated carbon rated for VOCs. This feature delivers enhanced performance that far exceeds regular cartridges. (NSF Standard 42 Certified.)

Stage 3: Matrikx +5 (2 - 5 micron) high efficiency activated carbon block water filter for additional reduction of chlorine, taste, odors, chemicals, and VOC's. Features premium coconut shell activated carbon rated for VOCs. This feature delivers enhanced performance that far exceeds regular cartridges. (NSF Standard 42 Certified.)

Stage 4: Premium Filmtec RO Membrane (FT30 technology, TFC Dry) for maximum contaminant reduction. (TW30-1812-**). Typical Rejection Rate (for NaCl) is 98.5%.

Stage 5: Premium Filmtec RO Membrane (FT30 technology, TFC Dry) for maximum contaminant reduction. (TW30-1812-**). Typical Rejection Rate (for NaCl) is 98.5%. This processes the waste water to achieve high efficiency.

Stage 6: OmniPure Activated Carbon GAC Inline Post Filter (10” size with 1/4" threaded ports) to remove any possible taste from the storage tank. (OmniPure is the leading manufacturer for this type of cartridge.)

Unique built-in System Pressure Gauge (0-160 PSI). This is an uncommon feature among reverse osmosis systems. This gauge will tell you 3 important things about your system:
- The pressure drop caused by dirt accumulating on your carbon cartridges. Just write down the Initial Pressure when you first run the system with brand new carbon cartridges. Now you can "see" how dirty they are getting as the pressure goes down a little each month.
- The Intake Pressure of the RO membrane. The RO membrane itself requires at least 51 PSI water pressure coming into the Membrane Intake to function properly. (You can only get a reading off the pressure gauge when the RO water is flowing out the RO Faucet.) Pressure Gauge also functions as an excellent diagnostic tool.
Quick Connect type tube fittings implemented throughout the system. Red locking clips installed on all fittings for extra security. This is another uncommon feature for RO systems.

Steel Frame/Bracket for maximum structural integrity. This durable frame/bracket is much stronger than the plastic ones.

Whole System (Intake) ON/OFF Ball Valve for easier shutoff during cartridge changes. This is a rare feature in RO units.

Automatic Shutoff Valve for Tank (already installed) shuts off system automatically without wasting any water when the tank is full.

Lead-free Long Reach RO Faucet Spout (Non Air-Gap). This faucet is upgradeable with verbal orders.

4 gallon Bladder Tank (steel jacketed) is NSF certified and holds 2.5-3 actual Gallons. Approx. Dimensions of Tank: 11"x 11" x 16"

Approx. Dimensions of RO System (without Tank): 16.25" Wide, 17" Tall, and 6" deep.

Food-grade 230 PSI 3/8 polyethylene water tubing 3/8” Tank to Faucet and Tank to System tubing.
About 92% of all our parts are NSF Certified, and the remainder 8% of the parts have been WQA Certified to the same NSF standards.

Inline Flow Restrictors are installed to minimize clogging more efficiently, unlike Capillary Flow Restrictors used in most RO units.

For superior quality we only use all stainless steel, non-clogging Check Valves on our units.

Provided with complete installation instructions, although we greatly recommend professional installation for best satisfaction.