6 Stage RO Water Systems - High Efficiency - Low Waste

Our 6 Stage High Efficiency - Low Waste RO System is recommended for:

People who need less waste water - water conservation areas.
Reduces RO system Waste Water by about 50% (using 275 ppm test water at 75 F.)
This unit is about 50% efficient. A standard high-quality RO system is about 25% efficient.
creating pleasant, crystal clear purified drinking water
improving the taste of nasty, problematic water
eliminating water softener salts, fluoride, nitrates, and metals
reducing pesticides, herbicides, nitrates, and other pollutants
reducing organic pollutants and pharmaceutical contaminants
eliminating disease-causing microorganisms (including viruses)
creating healthier drinks and herbal teas with less pollutants (when present)
reducing ARSENIC levels (when present) by typically 90-98% initially, depending on water conditions. Periodic monitoring is recommended.
NOTE: Requires AT LEAST 60 PSI water pressure to operate and less than 9 Grains of Hardness. Maximum TDS: 500 ppm
Maximum Iron: 0.05 ppm, Max. Manganese: 0.025 ppm,
Before you purchase: Click on the Requirements Tab below to check if this unit will work with your water chemistry.

For premium RO System Accessories, click here.

For RO Replacement Cartridges, click here.

Our top quality Silver Series RO Systems come in the following models:

Note: GPD = Gallons Per Day with 77° F. water

6 Stage High Efficiency 150 GPD RO System

Item: 6ROPP150

6 Stage RO Water System, Complete with (2) 75 GPD Filmtec Membranes, Premium Faucet, System Pressure Gauge, Pressure Tank, Membrane Flush Feature, and extra high performance VOC Reduction cartridges.

NOTICE: Before you purchase: Click on the Requirements Tab above to check if this unit will work with your water chemistry.

Price: $375.00

Click to Build Add- Ons:

	Install Aquatec™ 8800 Pressure Booster Pump to my RO system. (120 volts, uses 24 watts.) AquatecT 8800 Pressure Booster Pump for household water pressures less than 60 PSI. Aquatec is top quality. Price: $135.00
	Install Filtamate™ (85 PSI) Pressure Limiting Valve to my RO system. For protection against the common rogue water pressure spikes that can exceed the 95-100 PSI limit of your RO System and cause permanent damage to your system and void your warranty. Price: $23.00
	Install 1 GPM/6 watt UV Disinfection Unit (plastic) to my RO system. For UV disinfection of virus and bacteria that may slip through your system. 6 watt UV Lamp in Stainless Steel LINED plastic housing unit. Lamp (bulb) lasts for 1 year, and delivers approx. 32 microwatts/sec. UV dose at a flow rate of 1/2 GPM. (120 volts, 8-10 watts, AC) Price: $89.00
	Install 2 GPM/16 watt UV Disinfection Unit (all stainless steel) to my RO system. For even stronger UV Disinfection of virus and bacteria that may slip through your system. 16 watt UV Lamp in ALL Stainless Steel housing unit. Lamp (bulb) lasts for 1 year, and delivers approx. 60 microwatts/sec. UV dose at a flow rate of 1 GPM. Made by Philips UVT . (120 volts, AC) Price: $168.00
	Install Dual Readout Digital Inline TDS Monitor to my RO System. Factory installed for you when ordered with your system. Item # DM-2 TDS Monitor To monitor the integrity of your RO membrane and see how well it is performing you would measure the TDS value. This DM-2 digital monitor is a laboratory grade instrument and will show you BOTH the Incoming Water TDS value and the Product Water TDS (after) value so you can see the difference and know when to change the membrane. This difference in values will alert you to any TDS Breakthrough caused by membrane degradation (wear and tear), membrane defects, or membrane bypassing caused by incorrect installation or bad seals. Range 0-9990 ppm. Accuracy: +/- 2% Uses 2 AAA batteries. Price: $70.00
	Install top-of-the-line Touch-FloT Air-Gap Chrome Faucet Change my standard Non Air Gap Chrome Faucet to a Touch-Flo Air Gap Chrome Faucet. This faucet has a black lever and a convenient Long Reach Spout. Air Gap is required in some new house construction. Generic available below. Price: $23.00
	Install Generic Touch-Flo-type Air-Gap Chrome Faucet Change my standard Non Air Gap Chrome Faucet to a Generic Air Gap Chrome Faucet. This faucet has a black lever and a convenient Long Reach Spout. Air Gap is required in many communities now. Price: $11.00

Install Inline Calcite Cartridge to my RO system for health benefits.

This unique option will:

add a small amount of natural benefical minerals (calcium carbonate with trace magnesium) back to the RO water
Neutralize acidic RO water when needed
Raise the TDS level of the RO water so it is less aggressive to the faucet metals.

These are some great potential health benefits!

The inline 100% Calcite cartridgethat we use is not a mixture of carbon and calcite but is fully loaded with 100% calcite. This makes the calcite last longer and work better.
This cartridge is IN ADDITION TO the 100% Coconut Shell GAC Carbon cartridge already installed onto your unit ( that polishes the RO water that comes out of the pressure tank).
This gives superior performance from a full charge of GAC carbon - and a full charge of Calcite, vs. a half -charge of each. This gives you a greatly improved performance from each.
Factory installed for you.

Item # JOPTRO025I

Price: $22.00

Replace the standard faucet with a High Purity 100% Stainless steel Faucet.

100% Type 304 Stainless Steel throughout the entire faucet for high purity drinking water applications.

Contains no chrome parts, "lead free" parts, brass parts, or chemical finishes.

Ideal for RO Water, distilled water, or aggressive water that would otherwise dissolve trace metals from standard faucets.

Prop. 65 compliant "lead-free"

Non-Air Gap type: simply hooks up to one purified water supply tube.

Long Reach spout design allows for easier filling of pots, and swivels from left to right.

Installs into a 1/2" hole in sink top.

Ships separately via US Mail.

Item # INLRF304SS

Price: $29.00

Prices are subject to change without notice.
We reserve the right to change incorrectly priced items.