Aquatec Booster Pumps (for RO Units)
A Reverse Osmosis Water System membrane requires a pressure greater than 50 PSI to function properly. The carbon filter cartridges (before the membrane)will cause an additional pressure drop (when new) which actually increases as the filter cartridge is being used and gets dirty. To know what your water pressure is, use an affordable water pressure tester.
For proper performance we recommend a Pressure Boosting Pump for your RO System if your household water pressure is not 53 PSI or greater.
Aquatec Series 6800 Booster Pump
|
Features of the Aquatec 6800 Booster Pump for RO Water Systems :
Item #:
ABP6800-14 or ABP6800-38
- Use the Aquatec 6800 pump for membranes 50 GPD or less.
- Price Includes:
- 6800 Pump which accepts 1/4" tubing. Install onto the 1/4" tubing before your Stage 1 Sediment Filter intake.
- Includes 110 volt Transformer. Plug into a GFC Outlet.
- Automatic Shut Off Switch - You must choose either 1/4" or 3/8" size. Sensor switch installs onto the tubing coming out of your Pressure Tank, near the tank.
- Pump turns on automatically when the Tank Pressure drops to 40 PSI and turns off automatically when Tank Pressure reaches 60 PSI.
- This pump will not burn up if you run them dry or stop them up!
- 110 volts AC. uses only 24 watts!
- Do not use for the GE Merlin RO System. Use the Merlin Booster.
- Manufacturer says these pumps may be field serviced with a Diaphragm Replacement Kit approximately every 3 -4 years, depending on water conditions and usage conditions.
- Aquatec Website Link for info and instructions.
- Use and Install at your own risk.
* CONTACT US if you need this in a 12 volt DC version to operate off of a 12 volt battery system.
Aquatec 6800 Booster Pump for 1/4" Tank Tubing 
I
|
Only $120. |
Aquatec 6800 Booster Pump for 1/4" Tank Tubing
Item: ABP6800-14
|
Only $120. |
Aquatec 6800 Booster Pump for 3/8 " Tank Tubing
Item: ABP6800-38
Price: $120.00
|
Aquatec Series 8800 Booster Pump
|
Features of the Aquatec 8800 Booster Pump for RO Water Systems :
Item #: ABP8800-14 or ABP8800-38
- Use the Aquatec 8800 pump for membranes 75 GPD or 100 GPD.
- Price Includes:
- 8800 Pump which accepts 1/4" tubing. Install onto the 1/4" tubing before your Stage 1 Sediment Filter intake.
- Includes 110 volt Transformer. Plug into a GFC Outlet.
- Automatic Shut Off Switch - You must choose either 1/4" or 3/8" size. This sensor switch installs onto the tubing coming out of your Pressure Tank, near the tank.
- Pump turns on automatically when the Tank Pressure drops to 40 PSI and turns off automatically when Tank Pressure reaches 60 PSI.
- This pump will not burn up if you run them dry or stop them up!
- 110 volts AC. uses only 24 watts!
- Do not use for the GE Merlin RO System. Use the Merlin Booster.
- Manufacturer says these pumps may be field serviced with a Diaphragm Replacement Kit approximately every 3 -4 years, depending on water conditions and usage conditions.
- Aquatec Website Link for info and instructions.
- Use and Install at your own risk.
* CONTACT US if you need this in a 12 volt DC version to operate off of a 12 volt battery system.
|
Only $135. |
Aquatec 8800 Booster Pump for 1/4 " Tank Tubing
Item: ABP8800-14
|
Only $135. |
Aquatec 8800 Booster Pump for 3/8 " Tank Tubing
Item: ABP8800-38
|
Prices are subject to change without notice.
We reserve the right to change incorrectly priced items.
No returns on used or installed booster pumps. Manufacturer's Warranty Only.
